L S /p p Appropriate ToolsThe illustrations below show the asus appropriate tools that should be used for the service Eee PC 4G (701)s service and repair.
p p R D /p p MotherboardThe service illustrations below show how to disassemble and remove asus the moving Motherboard /p p /p p 30 Tear off 2 pieces of tape fixing the Modem asus cable and disconnect the Modem cable from mother service board.
p p Service overview Motherboard Module /p p L E /p p The illustration below shows the motherboard module of the Eee PC 4G (701).
Be sure to use proper tools described before.
Fter you have completed the previous chapter asus of complete disassembly, please follow this chapter to assemble the Eee PC 4G (701) back together.The module contains LCD panel, Inverter board, LCD bezel, LCD back cover.Disconnect the touch pad FPC and then remove 9 screws (M2*4) on top case.p p Service overview /p.Install the two speakers on LCD back cover and arrange the speaker cable well through cable guide.
It can be exchanged with keyboard plates with different language layouts, such.S., France and others.
Install the keygen camera board service on LCD back cover, pay attention to the aiming pole.
p p Disassembly procedure /p.
serial p p /p p E /p p Bottom Case Module /p p The illustration below shows the bottom case module of manual the Eee games PC 4G (701 top and bottom view.Remove 1 piece of tape and 3 screws (M*4) securing the Fan module and then take the Fan module away.Lift the mother board from bottom case by softly separating from the bottom side, two sides to the top.* pay attention not to remove the mother board for fscaller now, for that the wlan antenna is still connected with the mother board.Remove 2 screws (M2*3) securing touch pad bracket and then remove the bracket.polychlorinated biphenyls (PCB) containing capacitors in accordance with Council Directive 96/59/EC of 16 September 1996 on the disposal of polychlorinated biphenyls and polychlorinated terphenyls (PCB/PCT - mercury containing components, such as switches or backlighting lamps, - batteries, - printed circuit boards of mobile phones.This chapter lists the detailed specifications of the notebooks main system and modules.p p Service overview /p p Se r vic e Ove r vie wPlease pay special attention to the cautions below to prevent any damages to the Eee PC 4G (701) and also please be sure to select the appropriate tools described in this section.Remove 3 pieces of tape fixing the cable and then disconnect the following 4 cables, namely speaker cable, CMR cable, Fan cable, lvds cable.Memory Module, keyboard Module, wLAN Module, top Case Module.Be sure that the Eee PC 4G (701) is powered down.p p Disassembly procedure /p p 40 Remove two screws (M2*3) securing the Modem module and then remove it from the mother board.p p Single-Slotted Screw driver R /p p Use a single-slotted screwdriver to lock/unlock keygen the flexible cable connector locks /p p Tw eezers R S /p p Use a pair of tweezers to remove/insert flexible cables.SST/Winbond/mxic 4Mbits, graphic Accelerator, intel 910GML internal GPU 3D, yes, controller, intel Internal graphic.Disconnect the AC plug from the Eee PC 4G (701) /p.